Product Description
A microwave shelf is one of the most practical and essential items in any kitchen. This shelf is a versatile organizer for all small kitchens and other kitchens that hold a lot of equipment and utensils, and it greatly improves the interior space of the kitchen. It is worth noting that this stand is not only used for microwaves, so you can place your other kitchen equipment such as a coffee maker, fryer, blender, juicer and tester on its shelves and make the best possible use of your kitchen interior space. Also, this stand, with its beautiful design used in the production of the product, complements the beauty of the kitchen interior and makes the interior of your kitchen look more beautiful.
This stand has a fixed walled floor with a thickness of 1 mm, which is 30 cm wide and 60 cm long. Due to high customer demand, 50 cm and 40 cm long or spans have also been introduced to the market since the new year. It provides the necessary and sufficient space to place any equipment and devices on its floors. It is connected to the main frame with 4 bolts on both sides of the floor plate. It also has a 10 x 10 profile connector on the back of the stand that connects the two main legs of the stand and maintains the balance of the stand.
The frame of this stand is made of a 20 x 20 profile, which is very resistant and very resistant to heavy equipment and objects. Also, all parts of this stand have a kiln color and are largely resistant to scratches and scratches. It can be easily assembled with 6 screws in less than a few minutes.
The design of the microwave floor stand is such that it can accommodate the largest microwave size available on the market, which is the Solardam series, and its internal dimensions include 61 cm, 50 cm and 40 cm (3 sizes) of opening or distance between its two columns and has a height of 41 cm to the ceiling and an internal depth of 40 cm.
The color of this stand is black and matches well with the color scheme of other kitchen interior items. This stand also has a separate hanging hanger plate on which you can hang items such as knives, ladles and other hanging kitchen utensils, which can be ordered separately and is offered in two types of packaging with and without a hanger, the hanging type having a higher price than the model without a hanger, which is currently being offered to customers free of charge on all products due to the opening of this product and the promotional promotions of the Spring surefit Festival until the end of June.
Installation method:
In the nylon package inside the carton of this product, there are a total of 6 black screws, 4 nuts and an Allen wrench. 2 of the screws are longer than the others and are used to install the thinner balance bar on the back of the stand, and the remaining 4 screws have nuts that are used to install the plate stand to the legs.
To install the microwave shelf stand, first attach the 2 longer screws inside the package to the thin balance bar on the back of the stand after passing them through the end holes of the U-shaped legs so that the other 2 holes of the plate are along each other and in the same direction. Make sure that the U-shaped legs are not in 2 different directions and that the 4 holes for the upper screws of the plate stand are opposite each other. If you do not pay attention to this point, you may have to unscrew the screws again and change the direction of the legs. After installing the screws of the balance bar on the back of the stand, tighten the screws loosely by hand or with the Allen wrench inside the carton until only the screws go all the way into the screw holes. Be careful not to overtighten the screws until all the screws are installed first. After the installation is complete and the stand is balanced, tighten the screws.
Then, install the plate from the part that says +SUREFIT facing you to the stand legs from the part where its two front bends are facing you with the remaining 4 screws. First, attach the 2 screws on one side of the stand, then first place the hanging piece on the other side of the stand base so that the holes of the hanging piece are along the holes of the base, then pass the screws through the holes and attach the nuts to the screws from the back, and slowly tighten all 4 screws evenly. Never tighten the screws one by one. Tighten all the screws of the plate evenly in 2 steps.
Finally, tighten the balance bar screws with an Allen wrench and after this step, your stand is ready to use. Note that you should not overtighten any of the stand screws. It is enough to tighten them to the point where the screws go all the way in, because applying too much pressure to the screws may cause the body profile to crack or the internal welds of the stand to break. Therefore, there is no urgent need to overtighten the screws. It is enough to tighten the screws to the point where the screws are completely closed and slightly tightened. Overtightening the screws will not have any effect on the stand’s stability and, on the contrary, may damage the product you purchased. Finally, note that installing the stand, while simple, requires care. It is better not to install the stand alone, but to install the stand with two people. When installing the screws, one person holds the plate or the legs with his hand and you can easily install its connections.
Reviews
There are no reviews yet.